Quick answer
Which grade do I need, and how do I know I received it?
Grade names are not an industry standard. At this factory a grade of hookah coals is a set of target ranges, with ash first, that is written into your specification sheet and checked against the lab report for your batch. Order by the range, not by the name, because another supplier can use the same grade name for different numbers.
Hookah coal grades at a glance
As declared, November 2026
- Grades
- Platinum, Super Premium and Premium (target)
- Ash, Platinum
- 1.6-1.9% (target)
- Ash, Super Premium
- 1.9-2.2% (target)
- Ash, Premium
- 2.3-2.5% (target)
- Written into
- Your specification sheet
- Checked against
- The lab report for your batch, sent on request
1. The grade ladder in numbers
A grade here is a row of numbers, and ash comes first. The table gives the target ranges behind the three names.
Definition
grade
A grade is a supplier's own name for a set of target ranges for hookah coals, such as ash content and burn time. Grade names are not an industry standard.
| Parameter (target) | Platinum | Super Premium | Premium |
|---|---|---|---|
| Ash, % of weight | 1.6-1.9% | 1.9-2.2% | 2.3-2.5% |
| Burn time | 2 h 30 min | 2 h+ | 1 h 30 min+ |
| Pieces broken in a drop test | 1 in 10 | 2 in 10 | 4 in 10 |
Caution
These figures are targets, not test results. What a batch measured is shown on its lab report, which the factory sends on request.
Sizes and pieces per kilogram are a separate choice: see the six shapes of the range.
2. What the numbers change for a lounge and for a brand
The same three numbers matter in different ways to a lounge and to a retail brand.
For a lounge, ash and burn time decide the work per session: how often staff clear ash and how often they change coals. A lounge compares grades by the ash range and the burn time first.
For a retail brand, the buyer of the box counts and measures. Breakage decides how many whole pieces reach the shelf, and the stated range has to match what a customer finds in the box.
Note
The grade is one of six inputs to a quote. The page on how the grade moves the price of a container lists the other five.
3. How a grade is proven
A grade is proven by two things a buyer can hold: a lab report and a test of the sample.
The lab report states what was measured for a named sample, with the method for each value. The page on lab reports and how to check them lists what a report must carry and how to confirm it with the lab that issued it.
The sample test is yours. Count, weigh, measure and burn the sample in one session and write the results down on the sample test sheet, then compare them with the ranges you were quoted.
Important
A report covers the sample that was tested. Read which sample it names before you compare its values with a target range.
4. Order by number, not by name
Write the range into the purchase order, and add the grade name only as a label next to it.
- Ash: the range in percent of weight, with the method used to measure it.
- Burn time: the minimum, with the heat source and setup it is measured on.
- Breakage: the limit and the way it is tested.
- Shape, size and pieces per kilogram.
All of these lines are rows of the specification sheet, which both sides sign before production. An order that says only the grade name leaves nothing to check against.
Tip
Send the specification sheet with your quote request. The quote then refers to your numbers, not to a name.