Quick answer
Is 28 mm right for my market, and what does a container hold?
A 28 mm cube gives about 48 pieces per kilogram as a target. It is packed in a 1 kg box or bag inside a 10 kg carton unless you ask otherwise, in three grades, and sold by the full container. It is the largest of the four cubes, so it gives the fewest pieces per kilogram, and a 20 ft container holds slightly less weight than with 25 mm.
28 mm cube at a glance
As declared, November 2026
- Shape and size
- Cube, 28 mm (target)
- Pieces per kilogram
- About 48 (target)
- Inner unit
- 1 kg box or 1 kg plastic bag without box (target)
- Master carton
- 10 kg carton or 20 kg carton (target)
- Grades
- Platinum, Super Premium and Premium (target)
- 20 ft container load
- 19.5 t (planning figure)
- Minimum order
- 1 ocean container
1. Markets where 28 mm is quoted first
The export desk starts quotes for Germany, Iraq and Turkey from the 28 mm cube. That is the format the desk quotes first for those markets: a starting point for a quote, not a market statistic.
What the factory sends with a container, and what stays with your broker, is on the country cards: the country card for Germany, the card for Iraq and the card for Turkey.
Tip
If your market buys another size, say so on the quote sheet. The page that compares all sizes and shapes gives the count per kilogram for each.
2. Grades for 28 mm cubes
The 28 mm cube is offered in three grades: Platinum, Super Premium and Premium. At this factory ash alone sets the grade; moisture, volatile matter and fixed carbon are reported on the lab report.
| Grade | Ash, % of weight (target) |
|---|---|
| Platinum | 1.6-1.9% |
| Super Premium | 1.9-2.2% |
| Premium | 2.3-2.5% |
How a grade is proven, and what to write into an order, is on the page that gives the three grades in numbers.
3. Packing for 28 mm cubes
Unless you ask otherwise, 28 mm cubes are packed in a 1 kg box inside a 10 kg carton. The other formats on offer are:
- inner unit: 1 kg box;
- inner unit: 1 kg plastic bag without box;
- master carton: 10 kg carton;
- master carton: 20 kg carton;
- your own brand on the boxes, or neutral cartons.
A master carton of 10 kg holds ten 1 kg inner units, which is about 480 pieces of this size. The formats, and what the packing desk needs from you, are on the page about inner units and master cartons. The choice between the two cartons is on the page about 10 kg and 20 kg master cartons.
Note
The packing format is chosen per order and written into the quote. It is part of the specification, not a separate note.
4. Container load for 28 mm cubes
A 20 ft container of 28 mm cubes is planned at 19.5 t, as a planning figure. A 20 ft container fills by volume, so its load changes with the shape and the carton; a 40 ft container fills by weight.
The page on container loads for 20 ft and 40 ft gives the planning figures by shape and explains why the two containers behave differently.
Caution
A planning figure is for planning. The load for your order, by shape and carton, is stated on your quote.
5. Order wording for 28 mm cubes
Write the size as numbers in the purchase order, not as a name. For this size the lines are:
- shape and size: cube, 28 mm, with the tolerance you accept;
- pieces per kilogram: about 48, with the range you accept;
- grade: the ash range, the burn time and the breakage limit, each with its method;
- packing: the inner unit and the master carton;
- the load and the carton count per container.
Each of these lines is a row of the specification sheet for your purchase order. Both sides sign it before production, and the lab report for the batch is read against it.
Important
The factory states a size tolerance of ±0.3 mm per side. Write the tolerance you accept on your specification sheet, so that a piece can be accepted or rejected on arrival.