Quick answer
Is the flat shape right for my market, and what does a container hold?
A flat hookah coal measures 25 × 25 × 15 mm as a target. It is packed in 1 kg inner units and 10 kg master cartons unless you ask otherwise, in three grades, and sold by the full container. The piece count per kilogram is not on file for this shape, so it is fixed on the specification sheet.
Flat hookah coals at a glance
As declared, November 2026
- Shape and size
- Flat, 25 × 25 × 15 mm (target)
- Pieces per kilogram
- Stated on your specification sheet
- Inner unit
- 1 kg box or 1 kg plastic bag without box (target)
- Master carton
- 10 kg carton or 20 kg carton (target)
- Grades
- Platinum, Super Premium and Premium (target)
- 20 ft container load
- 18.5 t (planning figure)
- Minimum order
- 1 ocean container
1. When the flat shape is quoted
No country card starts from the flat shape; the export desk quotes it when a buyer asks for it. That is what the desk quotes, a starting point for a quote and not a market statistic.
Definition
flat coal
A flat coal is a hookah coal pressed as a low square block, thinner than a cube of the same footprint.
Tip
The page that compares all shapes and sizes sets this shape beside the cubes. The other shape that is not a cube is the hexagonal coal.
2. Grades for flat coals
The flat shape is offered in three grades: Platinum, Super Premium and Premium. At this factory ash alone sets the grade; moisture, volatile matter and fixed carbon are reported on the lab report.
| Grade | Ash, % of weight (target) |
|---|---|
| Platinum | 1.6-1.9% |
| Super Premium | 1.9-2.2% |
| Premium | 2.3-2.5% |
How a grade is proven, and what to write into an order, is on the page that gives the three grades in numbers.
3. Packing for flat coals
Unless you ask otherwise, flat coals are packed in a 1 kg box inside a 10 kg carton. The other formats on offer are:
- inner unit: 1 kg box;
- inner unit: 1 kg plastic bag without box;
- master carton: 10 kg carton;
- master carton: 20 kg carton;
- your own brand on the boxes, or neutral cartons.
A master carton of 10 kg holds ten 1 kg inner units. The formats, and what the packing desk needs from you, are on the page about inner units and master cartons.
Note
The packing format is chosen per order and written into the quote. It is part of the specification, not a separate note.
4. Container load for flat coals
A 20 ft container of flat coals is planned at 18.5 t, as a planning figure. A 20 ft container fills by volume, so its load changes with the shape and the carton; a 40 ft container fills by weight.
The page on container loads for 20 ft and 40 ft gives the planning figures by shape and explains why the two containers behave differently.
Caution
A planning figure is for planning. The load for your order, by shape and carton, is stated on your quote.
5. Order wording for flat coals
Write the shape as numbers in the purchase order, not as a name. For this shape the lines are:
- shape and size: flat, 25 × 25 × 15 mm, with the tolerance you accept on each of the three figures;
- pieces per kilogram: the count measured for your order, with the range you accept;
- grade: the ash range, the burn time and the breakage limit, each with its method;
- packing: the inner unit and the master carton;
- the load and the carton count per container.
Each of these lines is a row of the specification sheet for your purchase order. Both sides sign it before production, and the lab report for the batch is read against it.
Important
The factory publishes no count per kilogram for this shape, so the count on your specification sheet is the one that binds. The factory states a size tolerance of ±0.3 mm per side.