Quick answer
How are the coals dried, and what does it change for my order?
The factory dries pressed hookah coals in six ovens fired with wood pellets. Drying removes the water added at mixing; the factory states a cycle of 48 hours or more, to a moisture of 2% at most. The coals then rest for at least 14 days before they are packed, as the sea transport rules for charcoal require.
Drying at a glance
As declared, November 2026
- Drying ovens
- 6
- Oven fuel
- Wood pellets
- Daily capacity
- 7 tons per day
- Drying cycle
- 48 hours or more
- Moisture after drying
- 2% at most
- Rest before packing
- At least 14 days, under special provision 978
The 14-day figure is that of special provision 978, checked on 17 November 2026. The source is under the third section. How sources are checked
1. The six ovens
The plant dries pressed briquettes in 6 ovens fired with wood pellets. A drying oven is the fourth of the six stations: the pieces arrive wet from the press and leave dry for the weathering area.
The ovens also set the pace of the plant. The declared output is 7 tons per day, and no more can be packed in a day than the ovens have dried. Where drying sits among the other stations is on the page about how hookah coals are made.
Note
The oven count and the fuel are declared by the factory. A buyer can ask to see the ovens on a video call from the floor.
2. What drying changes in a briquette
Mixing adds water to the charcoal powder so that it can be pressed. Drying takes that water out again: the factory states a cycle of 48 hours or more, to a moisture of 2% at most.
Three things on a sample show whether drying went well. None of them is a result this page reports; each is something to check yourself.
- Moisture: the figure on the lab report, against the limit on your specification.
- Hardness: whether pieces hold together when they are handled and dropped.
- Cracks: whether pieces show cracks on the surface or split when they are lit.
The scorecard for these checks is the sample test sheet. At the plant, moisture is measured with a moisture meter on every oven load.
3. After the oven: cooling and weathering
Dry briquettes are not packed straight from the oven. They cool, and then they rest. The rest has a minimum set by the sea transport rules.
Special provision 978 sets three figures for UN 1361 charcoal: at least 14 days of weathering after production before packing, a material temperature of no more than 40 °C on the day of packing, and at least 30 cm of headspace in the container. Carriers ask for a dangerous goods declaration, a weathering certificate and a stuffing (vanning) certificate. (The provision allows an inert-gas packing route and approval by the competent authority as alternatives to 14 days of weathering. Rules on stacking height and gaps between packages were seen in one secondary source only and are not stated on the site.)
Source: Resolution MSC.556(108): Amendments to the IMDG Code, special provision 978 (opens in new tab), International Maritime Organization, accessed
For a buyer the rule means that drying is not the last date in the schedule. What it asks of the material and of the container is on the page about the loading conditions for charcoal.
Important
The rest period is counted in the lead time of every order. It cannot be shortened to meet a date.
4. What to ask about drying
Two things can be asked for, and both are specific to your order.
- The drying record of your batch: the dates the batch went into the ovens and came out.
- The moisture line on your specification: the limit you need, with the method used to measure it.
The moisture line is a row of the specification sheet, which both sides sign before production. How drying and the rest period add up to a lead time is on the page about capacity and lead time.
Caution
This page gives no oven temperature. The factory has not stated one, and a figure that is not stated is not estimated.
Questions and answers
How many drying ovens does the factory have?
How long are hookah coals dried?
What happens to the coals after drying?
Sources
- Resolution MSC.556(108): Amendments to the IMDG Code, special provision 978 (opens in new tab), International Maritime Organization — accessed