Skip to content

PT Hookah Coals Coconut Charcoal Indonesia · Mungkid, Magelang, Central Java, Indonesia

Menu

Order sheet · Quality Control

Hookah Coal Specification Sheet — Numbers for Your PO

This sheet belongs to the quality control desk of the factory, which makes hookah coals, also called shisha charcoal. It is both a reference table and a form: read the targets, then send your own requirement.

Written by
Rudi Kurniawan
Updated

Quick answer

Which numbers do I write into the order so there is no argument later?

A purchase order for hookah coals should state numbers, not grade names, each with how it is measured. The numbers are size and tolerance, pieces per kilogram, ash, moisture, burn time, breakage and packing. This specification sheet lists them with the factory's target ranges by grade, and its last column is your requirement, which you fill in and send.

1. The specification sheet

Seven parameters describe a container of hookah coals. Each row gives what the parameter tells you, the factory's target, and how the value is measured.

Definition

specification sheet

A specification sheet is the document that lists the measurable requirements of an order, each with its measuring method, and that buyer and factory sign before production.

The specification of hookah coals: seven parameters, what each tells a buyer, the factory's target by grade or size, and how the value is measured. Targets stated by the factory; none is a measured value.
ParameterWhat it tells youTarget (stated by the factory)How it is measured
Size and tolerance Whether a piece fits the device and the boxCubes of 25, 26, 27, 28 mm; tolerance: stated on your quoteCaliper, in millimeters
Pieces per kilogram How many pieces a box holds25 mm: about 72; 26 mm: about 64; 27 mm: about 54; 28 mm: about 48Count of one weighed kilogram
Ash, % of weight How much is left after burningPlatinum: 1.6-1.9%; Super Premium: 1.9-2.2%; Premium: 2.3-2.5%Named on your specification
Moisture, % of weight How dry the coals are when packedStated on your quoteNamed on your specification
Burn time How long a lit piece gives heatPlatinum: 2 h 30 min; Super Premium: 2 h+; Premium: 1 h 30 min+One stated heat source and setup
Breakage How many pieces break in handlingPlatinum: 1 in 10 pieces in a drop test; Super Premium: 2 in 10 pieces in a drop test; Premium: 4 in 10 pieces in a drop testThe drop test named on your specification
Packing How the coals are sold and shipped1 kg box or 1 kg plastic bag without box; inside a 10 kg carton or 20 kg cartonCount and weight per inner unit

Caution

Every figure in the third column is a target. A row that reads "stated on your quote" has no published target yet.

Definition

ash content

Ash content is the share of a coal's weight that is left as ash after the coal has burned completely, stated as a percentage.

Definition

moisture content

Moisture content is the share of a coal's weight that is water, stated as a percentage.

Definition

burn time

Burn time is how long a lit hookah coal keeps giving usable heat, measured on one stated heat source and setup.

2. How to use the sheet

Attach the sheet to your purchase order, and have both sides sign it before production starts.

  1. Read the targets for the grade and the size you want. The grades are compared on the page of the grade ladder, the sizes on the page that compares shapes and sizes.
  2. Write your requirement for each row, with the method you will use to check it.
  3. Send the sheet. The quality control desk checks each line against what the factory can make.
  4. Sign the agreed sheet with the factory, and name it in the purchase order and the proforma invoice.

Important

A number without a method cannot be checked. Burn time on one heat source is a different number on another.

3. Target values and measured values

A target is what is ordered. A measured value is what was made. The two meet on the lab report, which states what a named sample of the batch measured.

Which report proves what, and how to confirm a report with the lab that issued it, is on the page about lab reports for hookah coals. Your own check of a sample goes on the sample test sheet.

Note

This site publishes no measured values. A lab report is sent on request, for the batch it belongs to.

4. Send your specification

Fill in your requirement and send it. If you want a price at the same time, send the quote sheet as well and name this specification in it.

  1. Why we ask: A quote, a parcel and every document are addressed to a company.

  2. Why we ask: The reply is sent to this address.

  3. Why we ask: The first line of every specification.

  4. Why we ask: A size without a tolerance cannot be accepted or rejected.

  5. Why we ask: The count is what your customer notices first.

  6. Why we ask: The name is a label; the numbers below are the requirement.

  7. Why we ask: Ash is the first number that separates the grades.

  8. Why we ask: Moisture changes weight and how the coals light.

  9. Why we ask: State it with the heat source and setup it is measured on.

  10. Why we ask: State the limit and how it is tested.

  11. Why we ask: Packing is part of the specification, not a separate note.

  12. Why we ask: A number is checked by a method; name the one you use.

The reply comes by email to the address you enter.

Questions and answers

What should a hookah coal specification include?
Size and tolerance, pieces per kilogram, ash, moisture, burn time, breakage and packing, each with the method used to measure it. A number without a method cannot be checked.
What is the difference between a target value and a measured value?
A target is what you order and what both sides sign on the specification sheet. A measured value is what a lab report shows for the batch that was made.

Write your limits on the specification sheet

State the values you need. Quality control answers which grade is offered against them.

Open the specification sheet